Low Cost Biomass Burner Veneer Dryer-manufacture,factory,supplier from China

The 40 meters double layer biomass veneer dryer purchased by the Indonesian customer has been delivered, together with our biomass burner. The biomass burner is our patented product, which can directly burn waste wood, greatly saving the cost.

Recently Russia held the Russian woodworking exhibition, our Company's Russian agent participated in this exhibition, our equipment has the advantages of high efficiency and energy saving, low drying cost, with our patented product - biomass burner, for you to save fuel, it can directly burn all kinds of waste wood.

Our four-layer veneer dryer purchased by Myanmar customers is used to dry oak and received good feedback from the customer.It is used together with the biomass burner.The biomass burner acts as a heat source to provide high temperature for the dryer to ensure sufficient heat to effectively impact the wet veneer.At the same time,the bark of the peeling machine and the waste veneer of the rotary cutting machine are burned directly as fuel,which solves the problem of waste accumulation in the veneer plywood factory.

Why suggest you to choose Shine biomass burner roller veneer dryer ? 1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, no need to buy steam boiler or thermal oil again . which is energy-saving and environmentally friendly, and greatly reduces the drying cost. The comprehensive drying cost for one cbm is about $10 lower than thermal oil or steam boiler. 2.

Myanmar factory customer four layer veneer dryer and biomass burner matching use, The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing. and biomass burner can directly burn a variety of waste wood, greatly saving the drying cost.

The second 56m double-layer veneer dryer purchased by Huaxia Group Congo Branch was installed and successfully operated in Gongo,  the veneer dryer is equipped with our 6ton biomass burner , which can use the crushed waste wood as fuel directly and can save the drying cost to the most .The customer is very satisfied with our products !

When purchasing a veneer dryer, you should pay attention to: a good quality dryer has reasonable design, stable operation, energy saving and environmental protection, which can effectively improve the production capacity and quality of the dryer, and at the same time reduce the production cost of the dryer and the wear of parts , Consumption, reduce equipment maintenance costs. From the perspective of the performance of the veneer dryer, a good-quality dryer has the advantages of reasonable structure, low energy consumption, long service life, and durability.There are many types of kiln wood.

1. The biomass burner independently developed by our company is our patented product. It can use black, white, saw and other waste wood produced by veneer cutting as fuel, realizing local materials and turning waste into treasure. Greatly reduces the energy cost in the process of drying veneer, is the real energy saving and environmental protection of the dryer heating device.

Guangdong customers buy is our 48 meters 2deck veneer dryer with 6 tons of biomass burner,output per hour 3-3.5 m3/h,if it is a good fuel can reach 3.5 m3/h,temperature can reach 200 degrees,drying effect is very good,Customer feedback is very satisfied with the equipment.For customers to reduce the cost of drying,drying out of the veneer moisture content uniform, smooth,no wrinkles or end corrugated,no cracks,surface bonding state is good.

The 4 deck veneer dryer purchased by our customer was installed and debugged by our engineers at the customer's factory. It has been installed and is ready to be debugged. Customers are welcome to visit the equipment on site. It is made of biomass burning It can burn all kinds of waste wood and reduce the drying cost for you.